Product Category
cMAV-120 - Mixer Amplifier 120w - 100v/4 Ohm
The cMAV-120 is a high quality 120 Watt Mixer Amplifier designed primarily for use in commercial applications. There are 4 Microphone inputs with input gain controls on the rear, and front panel volume controls. The Line section provides for 5 separate inputs - 4 on the rear panel via RCA phono connectors, and an additional input on the front panel via 3.5mm jack plug, designed to facilitate music players. Outputs are via multipin euroconnector on the back panel. Connections are provided for 4 Ohm, and 50/70/100V line loads. Connections are also provided for recording, plug in of processing equipment between Pre-amp and Power amp sections, and output to slave amplifier.
Technical Specification
Microphone Inputs
Frequency response:100 Hz ~ 10kHz 1.5 dB
Distortion (THD):25V (1kHz) <1.2%
Gain range:-52dB ~ -30dB
Input impedance:600 Ohm
Noise (S/N Ratio):>98dB
Line Inputs
Frequency response:100 Hz ~ 10kHz 1 dB
Distortion (THD)25V (1kHz) <1%
Gain range:-52dB~ -30dB
Input impedance:1k Ohm
Noise (S/N Ratio):>105dB
Output power @ 4 Ohm120 Watts
Output power @ 50/70/100V120 Watts
S/N amplifier: better than 95dB
Distortion: <0,5% @ -6dB, 1kHz
Equalisation - Bass: 12 dB
Equalisation - Treble 12 dB
Record Output:+5dB
Microphone Phantom Power:
Power requirements:230V/50Hz or 24V DC
Power consumption:220W
Fuse rating:T2.5A
Dimensions and Weight:
Dimensions (mm):535 x 375 x 155 mm
Weight (kg):9.5Kg
© 2019 AVuno™ All rights reserved